There are a number of precautions to take in order to avoid injury and jump starting a car in the rain can be a challenge. If you are mindful not to catch a cold and hurt yourself letting the car run in the rain may not be that good. However, many people enjoyed to jump start a car in the middle of the wet days and lots of them believe there is nothing wrong with it.
As the electrical system in cars has a very low voltage, jump starting a car in the rain is completely safe and will not cause any harm to you. Since the voltage of your car is not high enough, there is no danger of being electrocuted. Doing so will not really cause any serious risks but that does not mean no danger is waiting ahead. Bear in mind that water is an excellent conductor of electricity.
To make it safe, make sure that the cables or any other electrical components of the car are placed safely. Always put everything in the right way to avoid increasing the chance of short-circuiting the battery. Can you jump start a car in the rain? Definitely, yes!
How to Jump Start a Car
Jump starting a car in the rain is not really dangerous but you need to follow some safe and secure jump starting process. Here is how you can make a good start.
- BRING OUT THE CABLES
Bring your jumper cables out. Most cars commonly have cables like this that you carry with you all the times. If your car does not have jumper cables then try asking someone for that thing.
2. FIND THE BATTERY LOCATION
Determine where the batteries are located on both vehicles. One of them may not be in the trunk and you got a job to find it out. Some cars have them both in the same location so make sure you know. Knowing the location of the batteries is important so you will easily be able to reach the batteries with the cables.
3. ENSURE PERSONAL SAFETY
The vehicles should not be facing each other with you standing between them. This situation is pretty welcoming for a potential disaster. Make sure vehicles are properly placed, the engines are off and brake should be properly set.
4. CONNECT THE RED CLAMPS
Pay attention to the order of the cable connection. Red is for the positive and black is for the negative. Connect the first red clamp to the positive post or battery terminal then connect the other red clamp to the positive post of the other vehicle.
5. CONNECT THE BLACK CLAMPS
After the red clamp connection, proceed on the black clamps. Go to the other vehicle and connect the black clamp on that end of the cables to the negative post. Do the same when it comes to the second black clamp. However, connecting the clamp on your end needs you to find an unpainted metal surface under the hood to provide the proper ground for a good connection.
6. START THE VEHICLE
Try starting the car for you to find out what a good connection you?ve done. If your car won?t start, make some adjustments then try starting it again. If you think you already have a good connection but still the car won?t start, ask the other vehicle to run it for you. If your car remains dead then check your battery.
7. KEEP THE ENGINE RUNNING
If you are able to start the car keep it running all the way. This will give the alternator enough time to recharge the battery. However, if the battery still does now work then you probably have a battery problem. Know this thing vigorously for a safe car jump starting.
8. DISCONNECT THE CABLES
To disconnect the cables safely, do it in the reverse order as the first you connected them. First, remove the black clamp from the metal surface of your vehicle, do the same on the other side, then disconnect the red clamp from your vehicle and lastly disconnect the red clamp from the other.
The Rain Car Jump Starting
Most of the time, the electrical system of cars is 12V which is far less than that of the house electrical system. Therefore, jump starting a car is completely safe even while it is raining. So if you need to jump start your car in the rain, go ahead and let the Auto Fella be the guide.